ResinDek FAQs
How thick are LD, MD, HD and Xspan®?
ResinDek LD, MD and HD are 3/4" thick and are designed to install over 20 gauge or heavier corrugated metal “B” decking. ResinDek Xspan is 1-1/8" thick designed to be installed directly over bar joists or structural supports without “B” decking.
How much does each panel weigh?
ResinDek LD - 3.06 lbs per square foot.
ResinDek MD - 3.44 lbs/sf.
ResinDek HD - 3.75 lbs/sf
ResinDek Xspan® - 5.2 lbs/sf.
What is more important - Uniform loads per square foot, or pallet jack loads?
While both are important, the loads imposed by pallet jacks are usually more critical because the load is more concentrated and dynamic instead of static. Pallet jack loads also appear to increase the risk of failure faster when recommended loads are exceeded.
When should I use the ESD finish?
ResinDek with ESD should be used whenever there is electrically sensitive equipment, including laptops, barcode scanners, and RFID devices on or around your work platforms. In addition, ResinDek ESD panels eliminate the occasional static shock that your personnel may occasionally experience when walking on a floor in dry environments.
Why do I have to use your ResinDek Drill Screws instead of my own?
You can use your own screws, but we cannot warrant against fastener related issues if you do. Our screws are self-drilling, require no counter-boring, and are computer color matched to the panel surface. Problems frequently encountered with other screws include strip out, improper seating of the screw head, and panel lift from the surface of the corrugated.
|
What is the standard unit size for ResinDek Panels?
ResinDek UF - 30 pcs. per unit
ResinDek® LD - 32 pcs per unit
ResinDek® MD - 32 pcs per unit
ResinDek® HD - 32 pcs per unit
ResinDek Xspan® - 21 pcs per unit
Can you apply a finish to ResinDek UF (unfinished) after it has been installed?
Yes, we offer coatings that can be applied directly over ResinDek UF on site. Please contact our office for details.
Home Runs with ResinDek
 Cornerstone Specialty Wood Products recently coordinated a ResinDek promotional mailing with several strategic partners.
We would like to take this opportunity to thank those that participated and congratulate those that have won personalized Louisville Slugger® Bats! We look forward to another season of homeruns with you! Cornerstone Specialty Wood Products, LLC Lucky Winners were: Steve Capito, Ismael Vicens, Charles Anttila, Darren Salapka, Chuck Frank, Bob Knight and Todd Brendel.
|